We have one sheet on hand that has some sapwood striping along the seam lines. Perhaps suitable for use on the back side of a panel.

These veneers have a pressure sensitive adhesive or "PSA" bonding layer on the back. Veneers with PSA backing are easy to apply and the only tools required are a razor knife and a veneer scraper. Please be certain to order the veneer scraper with your PSA veneer!

The pressure sensitive adhesive provides a permanent bond to almost any smooth substrate that is dry and free of surface contaminants. Common substrates include plywood, MDF, particle board, hardboard, and some metal surfaces. This adhesive layer is manufactured by 3M™ and is applied to the veneer when the sheet is manufactured. It can not be applied by the user to an existing veneer. PSA is often a good choice for cabinet refacing, speaker building, and much more.

What is a "plank matched" veneer?
There are some woodworking projects where the repetitive matching of sequential veneers laid side by side can look a little too artificial for some projects. Plank-matched sheets are made from several different flitches of veneer so that the sheet looks more like solid lumber. Each veneer within the sheet is different in size and grain pattern.

Orders placed before 1pm EST ship on the same business day.

Staining & Finishing
Since this paper-backed veneer is a real wood product, it can be stained/dyed easily and requires no special top-coats or finishes. Aniline dyes, oil and water based stains, Transtints, polyurethane, lacquer, conversion varnish, shellac, and tung oil are all compatible with our premium paper-backed veneers.

Matching Species Edge Banding
To complete your panel, we offer a wide array of species and sizes of real wood edge banding in pre-glued and non-glued styles. These rolls are in stock and shipped same day if ordered by 12pm EST.

Edge banding is very easy to apply with the right tools and technique. Check out this edge banding application guide.

Adhesive & Tool Suggestions

• We highly recommend Titan DX™ which will bond this veneer to plywood, MDF, and particle board.
• A scraper tool must be used to apply backed veneers with contact cement or Flex-Pro.
• Better Bond Heat Lock™ and Flex-Pro™ also work quite well.
• Better Bond X-Press™ veneer glue can also be used if a vacuum press is available.
• The excess veneer on a completed panel can be trimmed with a razor blade or a veneer saw, but many users get the cleanest cut with a down-cutting spiral bit mounted in a hand-held router.

More Information

Transit Time:	This veneer is in stock and ships directly from our warehouse in Maryland. Transit time information can be found here.
Shipping:	Order as much of this veneer as you wish and the shipping cost stays the same! No additional shipping costs will be charged for adding more of this veneer to your order. In other words, your shipping cost for one sheet is the same shipping cost for two, five, twenty, etc.
Return Policy:	Returns accepted within 30 days of receipt of shipment and are subject to a 15% restocking fee. The "matching" option is non-refundable.
Learn More:	Our PDF guide has answers to the most common questions about paper-backed veneer.