We have a very small supply of 30 mil polyurethane material that is approximately 24" x 48". However, there is a crease in the film where it is folded along the length... making it, more or less, a two-layer film that is approximately 24" x 24". We're not sure what you might make from it, but it's a great bargain. This item is non-returnable.

This material is the same polyurethane material that is used to make VS Extreme™ vacuum bags. It is typically used for making custom-sized vacuum bags or for use with DIY vacuum frame presses. Our polyurethane material is designed for VeneerSupplies.com using an advanced thermoplastic polyurethane that can withstand pressures exceeding 3,750 PSI and stretch more than 6 times its width and length*. Our polyurethane film has superior resilience and unmatched puncture resistance.

The size options shown are for single pieces of material only.
This product is not a vacuum bag. 

Features

• Lubricant Infusion - This bag material is infused with a non-transferring lubricant that works in several ways to make vacuum bagging easy and trouble-free. This lubricant prevents most woodworking adhesives from sticking to the bag. Glue that sets on the bag simply peels right off. Unlike traditional urethane material, our lubricant-infused polyurethane allows the user to easily slide the platens and project panel into the bag without "blocking" or binding. The slippery surface makes inserting project panels a breeze.
   _
• TPU Modifier - VS Elite and VS Extreme polyurethane material has a thermoplastic urethane modifier, which gives it the unique ability to be permanently welded with HH-66 vinyl cement. The mating surfaces must first be thoroughly cleaned with acetone or xylene.
   _
• Superior Resilience - Months of extensive testing resulted in a custom formulation that is unsurpassed in durability. Our polyurethane lasts up to 10 times longer than standard 30 mil vinyl.

 
Material Information 

• Softening Point: 150° F
• Melting Point: 320° F
• Weldable: Yes with most vinyl cements
• Thickness Variance: +/- 1 Mil

* Elongation and breaking strength based on ASTM D412 test method.