Shop by Species

Build a Vacuum Press!

    Build Your Own Vacuum Press

VeneerSupplies.com Monthly Newsletter

Vacuum Clamping

Vacuum Clamping KitA vacuum press can be used for much more than just veneering. Our simple vacuum clamping add-on and vacuum clamping jigs work in conjunction with your vacuum press to create a surprisingly strong clamp for holding projects while you sand, route, and carve.

Be sure to check out the Podz™ vacuum clamping jigs.
Vacuum clamping has never been so versatile and affordable!


  • $114.90 Vacuum Clamping Add-On
    The Project: EVS-2™ and Project: V4™ vacuum presses can be used for much more than just veneering. With this clamping kit you can use the massive holding power of vacuum to instantly hold work pieces to your bench top for sanding,...

  • $98.50 Podz™ Vacuum Clamping Jigs
    Podz™ are simple vacuum jigs designed to affordably clamp projects to your bench top. Using the power of your vacuum press and clamping system, the Podz™ 26-piece kit allows you to configure the clamping jigs any way you...

  • $12.95 Podz™ Vacuum Jig Gasket Set
    Are your Podz™ gaskets worn? Replace them with these OEM gaskets. Sold in packs of eight. Just like the originals that come with the Podz system each gasket is self-adhesive. Each gasket is approximately 3-7/16" square. Save 20% when you buy...

  • $6.50 Brass Adapter For Vacuum Clamping Jigs
    If you use your vacuum press for vacuum clamping, this fitting will allow you to directly attach the new version of the lock-on vacuum connector to the vacuum clamping jig. NPT Thread Size Option:  1/4" NPT or 1/8" NPT This part is not...

  • $89.95 $61.90
    - On Sale -
         Foot Valve for Vacuum Clamping
    1/4 NPT, 3-Way, 2-Position
    This 3-way/2-position latching foot valve is a rare find at this price. The pedal can be used to control vacuum flow on a clamping jig. Click it down once to enable air flow and then click it down again to stop the flow. The 3-way configuration...

  • $14.50 HDPE For Vacuum Clamping Jigs
    HDPE is perfect for custom vacuum clamping jigs and fixtures because it is non-porous. It holds vacuum pressure very, very well. It's also very strong and yet machinable with almost any woodworking tool. I've sawn, routed, turned, planed, and tapped...

  • $16.90 Inline Vacuum Pump Filter
    25 Micron
    A dedicated fine-particle filter is the easiest way to protect your vacuum press equipment from harmful debris. This vacuum filter is perfect for the vacuum press systems we offer and can handle up to 10 CFM of vacuum flow. Each unit comes with a...

  • $2.99 Mach Ball Valve
    For Vacuum Clamping
    These ball valves are used to create custom vacuum clamping jigs on CNC routers and workbench hold-downs. Each unit consists of a chromium ball bearing, tapered return spring, cir-clip and 13mm outside diameter housing body. The return spring holds...

  • $26.95 Vacuum Gasket Tape
    For Clamping
    3/8" x 1/8" x 82'
    With the help of a fellow woodworker, I've found the OEM source for an excellent self-adhesive vacuum sealing tape. This is not a knock-off. This is a high density on-board gasketing tape used on high-end industrial vacuum clamping systems. The...

  • $34.90 $28.10
    - On Sale -
         Vacuum Templating Gasket Tape
    3/8" x 1/16" x 150'
    With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is a high density on-board gasketing tape comparable to high-end industrial vacuum clamping...

  • $3.50 Brass Barb Fitting
    1/8" NPT Male to 1/4" Barb
    These fittings are best used on 3/4" vacuum clamping jigs. With 1/8" NPT threads, the hole is small enough to easily attach to the center of clamping jigs. Item is used with 1/4" ID vacuum tube. WARNING: This product can expose you to chemicals,...

  • $8.20 Brass Tube Adapter Fitting
    For Vacuum Clamping Jigs
    This ingenious fitting will allow you to use the new version of our lock-on vacuum connector to connect to 1/4" ID tube. This will only work with soft tubing. It will not work with rigid tubing. These are great for vacuum clamping jigs! Barb...

  • $9.25 $7.90
    - On Sale -
         Brass Tube Adapter
    w/ Free Lock-On Connector
    This ingenious fitting will allow you to use the old style lock-on vacuum connector to connect to 1/4" ID tube. These are great for vacuum clamping jigs. With your order we will also send you the compatible lock-on connector at no charge. Barb...

  • $2.95 Brass Barbed Tee
    The brass barbed tee splits the vacuum pressure to an additional clamping device. Select the option above for 1/4" or 3/8" ID tubing. WARNING: This product can expose you to chemicals, including lead, which are known to the state of...

  • $11.60 Vacuum Jig Tube
    This bright color PVC vacuum tube is great for vacuum clamping jigs due to its high durometer which prevents it from collapsing under strong vacuum. Depiste the high durometer, it's very flexible and easy to use. This is the tubing we include with...

  • $28.40 Latching Foot Pedal
    for 120 VAC Power Tools
    Though this item doesn't necessarily have much to do with vacuum pressing, I thought there would be a few woodworkers who would appreciate having one as much as I do. I have one in my shop that I move around to different tools when I need fast and...

  • $11.50 Lock-On Vacuum Connector
    This brass vacuum connector securely attaches to our vacuum bag stems and our vacuum clamping fittings. It has a soft O-ring inside which makes a leak-proof connection. All of our vacuum press kits include the new style of the lock-on connector...

  • $23.40 Vacuum Gasket Tape
    For Frame Presses
    3/8" x 1/4" x 39'
    With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is a high density on-board gasketing tape as good or better than what is used on industrial vacuum frame systems. The tape...

  • $98.50 Vacuum Manifold Assembly
    A manifold assembly will allow a vacuum press user to attach multiple vacuum bags to a single vacuum pressing system at the same time. Below you will find four different kits that will allow you to maintain a vacuum in up to 5 separate bags. Each...

  • $6.95 $4.80
    - On Sale -
         Vacuum Valve
    1/4" NPT to 3/8" Barb
    Here is an affordable vacuum valve with a 1/4" NPT male thread and a 3/8" barb. You find it is very handy for custom vacuum manifolds and more. This valve has a closed-open-closed handle configuration with a 180 degree swing. WARNING: This...

Shipping Discounts

    Reduced Shipping Rates In Effect