We have too many of these on hand and are now selling them well-below cost to get them out the door!
If you use your vacuum press for vacuum clamping, this fitting will allow you to directly attach the old-style lock-on connector to the vacuum clamping jig.
NPT Thread Size: 1/4" NPT
Connector Size: Schrader (.305" OD and 32 tpi)
WARNING: This product can expose you to chemicals, including lead, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.
By ordering this product, you acknowledge that it will not be used for installation in a system that is intended to convey or dispense water for human consumption through drinking or cooking.
Review by Phil Laudenklos
Rating:
I bought this to use vacuum at my lathe. I have the vacuum bag and vacuum pump purchased from Veneer Supplies. This fitting goes in the rotary adapter. Now I can move the vacuum pump to either setup. Works perfectly.
Review by Lou Nackman
Rating:
Used this and several other fittings to make a vacuum chamber to resin stabilize some knife scales. Arrived quickly. Works great with my vacuum set up that I previously purchased.
Review by Mike Lemer
Rating:
The Brass Tube Adapter paired with the vacuum connector made a quick simple connection to the vacuum chamber I have built. I is quick and easy to use and stands up to 30inHg perfectly every time.