Shop by Species

DIY Vacuum Press

    Do It Yourself Vacuum Press Monthly Newsletter

Micra-Stone™ Veneer: New York Sparkle
24" x 48"
Item: ST217GL
* Special Savings! *



Try the Veneer Match-Maker™
Regular Price:
Your Price:
$89.50   ($30.00 Savings!)
Genuine Stone Veneer
Current Stock:


Micra-Stone™ Veneer: New York Sparkle 
Zoom In

Micra-Stone™ Veneer: New York Sparkle
Width: 24"
Length: 48"
Thickness: .015" (approximately)
Stone Veneer #: ST217GL

Texture Grade: 3
Since each stone is unique, some will have more texture than others. We grade Micra-Stone Veneer™ with a scale that ranges from 1 (smooth) to 5 (coarse).

Precision Cut Exotic Stone
Micra-Stone™ veneer is the thinnest and most flexible stone offered in the USA. Though it seems impossible, this is not a printed or faux material. Each veneer is made from real stone which has been precision milled from premium grade metamorphic rock harvested from quarries around the world. The fiberglass backer strengthens the stone and gives it unmatched flexibility.

Easy Application
Use scissors to cut the veneer slightly larger than the final size of the project panel. Do not use solvent based adhesives to bond Micra-Stone to a project surface. We highly recommend bonding this to the project panel with Titan DX™ contact cement. Keep in mind that this adhesive will only bond to porous surfaces.

Apply Titan DX with a glue roller to the back of the veneer and to a project surface such as MDF, plywood, or particle board. When the adhesive becomes tacky, apply the stone to the project and use a rubber roller to "set" the bond and make it permanent. Excess veneer can be trimmed with a razor knife or the completed panel can be cut to size with a table saw or miter saw. Wear appropriate eye protection and a respirator if cutting/trimming with power tools.

Micra-Stone veneers have a fiberglass backing. Wear protective safety gear such as gloves, eye protection, and a NIOSH approved respirator when handling or cutting this product.

Optional Finishing
A water-based acrylic polyurethane or a floor "finish" designed for unpolished stone (available at most hardware stores in the tile and flooring aisle) can be applied to this veneer to protect the surface from scratches. The best results can be obtained with a semi-gloss stone finish. Alternately, the stone veneer can be left unfinished for an organic color and natural sheen. If left unfinished, some stones can scratch easily however these blemishes typically wipe off with a moist paper towel. Stone "sealers" and "wet look" finishes are not recommended as they can permanently darken Micra-Stone veneer. Test the finish on a scrap piece of stone veneer before applying to your project.

We occasionally have samples available of our stone veneer. Please click here to see what we currently offer.

Micra-Stone™ Suggestions
Make your next project truly unique! Here are some common uses.

Woodworking Projects
  • Cabinet Doors
  • Cabinet Sides
  • Inset Panels
  • Table Tops
  • Guitars & Drums
  • Hi-Fi Speakers
  • Automotive Trim
  • Wainescoting
Craft Projects
  • Handbags (yes, it's that flexible)
  • Wallets
  • Belts
  • Computer Cases
  • Desk Lights
  • Skateboards
  • Wall Covering
  • Scrap Booking

Click here for answers to frequently asked questions.

Your Wish List

Want to save this item for later? Click the button below to add this item to your wish list.

You Recently Viewed...