With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum clamping systems such as those from ShopBot, C..

Price: $28.00 $20.95

This vacuum clamping jig consists of two pieces of HDPE measuring 3/4" x 6" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable.

Kit Includes

• 2 Vacuum clamping jigs (pre-threaded and pre-d..

  Price: $35.50

  ]]>

  This vacuum clamping jig consists of two pieces of HDPE measuring 3/4" x 6" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable.

  Kit Includes

  • 2 Vacuum clamping jigs (pre-threaded and pre-d..

    Price: $35.50

    ]]> http://www.veneersupplies.com/products/Vacuum-Clamping-Jig-2.html Fri, 13 Apr 2007 10:20:19 +0000 http://www.veneersupplies.com/products/Vacuum-Clamping-Jig-2.html

    This vacuum clamping jig consists of one piece of HDPE measuring 3/4" x 12" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable.

    Kit Includes

    • 1 Vacuum clamping jig (pre-threaded and pre-dr..

      Price: $27.25

      ]]>

      This vacuum clamping jig consists of one piece of HDPE measuring 3/4" x 12" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable.

      Kit Includes

      • 1 Vacuum clamping jig (pre-threaded and pre-dr..

        Price: $27.25

        ]]> http://www.veneersupplies.com/products/Vacuum-Clamping-Jig-1.html Thu, 12 Apr 2007 13:36:12 +0000 http://www.veneersupplies.com/products/Vacuum-Clamping-Jig-1.html

        This vacuum clamping jig consists of one piece of HDPE measuring 3/4" x 6" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable.

        Kit Includes

        • 1 Vacuum clamping jig (pre-threaded and pre-dri..

          Price: $19.25

          ]]>

          This vacuum clamping jig consists of one piece of HDPE measuring 3/4" x 6" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable.

          Kit Includes

          • 1 Vacuum clamping jig (pre-threaded and pre-dri..

            Price: $19.25

            ]]> http://www.veneersupplies.com/products/Foot-Valve-for-Vacuum-Clamping-14-NPT-3-Way-2-Position.html Sun, 30 Jul 2006 12:36:06 +0000 http://www.veneersupplies.com/products/Foot-Valve-for-Vacuum-Clamping-14-NPT-3-Way-2-Position.html

            This 3-way/2 position latching foot valve is a rare find at this price. The pedal can be used to control vacuum flow on a clamping jig. The 3-way configuration allows vacuum to be instantly exhausted from the vacuum jig without losing any additional vacuum pressure from the main vacuum system. ..

            Price: $52.15

            ]]>

            This 3-way/2 position latching foot valve is a rare find at this price. The pedal can be used to control vacuum flow on a clamping jig. The 3-way configuration allows vacuum to be instantly exhausted from the vacuum jig without losing any additional vacuum pressure from the main vacuum system. ..

            Price: $52.15

            ]]> http://www.veneersupplies.com/products/Mach-Ball-Valves-6-Pack-For-Vacuum-Clamping.html Tue, 04 Apr 2006 14:11:33 +0000 http://www.veneersupplies.com/products/Mach-Ball-Valves-6-Pack-For-Vacuum-Clamping.html

            These ball valves are used to create custom vacuum clamping jigs on CNC routers and workbench hold-downs. Each unit consists of a chromium ball bearing, tapered return spring, cir-clip and 13mm outside diameter housing body. The return spring holds the ball bearing up flush against the tapered ..

            Price: $11.25

            ]]>

            These ball valves are used to create custom vacuum clamping jigs on CNC routers and workbench hold-downs. Each unit consists of a chromium ball bearing, tapered return spring, cir-clip and 13mm outside diameter housing body. The return spring holds the ball bearing up flush against the tapered ..

            Price: $11.25

            ]]> http://www.veneersupplies.com/products/Ball-Valve-Drill-Bit-13mm.html Tue, 04 Apr 2006 13:51:58 +0000 http://www.veneersupplies.com/products/Ball-Valve-Drill-Bit-13mm.html

            This is a standard 13mm drill bit made by Blu-Mol. High speed steel construction with shank size of 3/8". It is used to drill holes in custom vacuum clamping jigs to hold the matrix style ball valves.
            
            I bought these bits a few years ago. They are brand new and unopened but there are ..

            Price: $5.50

            ]]>

            This is a standard 13mm drill bit made by Blu-Mol. High speed steel construction with shank size of 3/8". It is used to drill holes in custom vacuum clamping jigs to hold the matrix style ball valves.
            
            I bought these bits a few years ago. They are brand new and unopened but there are ..

            Price: $5.50

            ]]> http://www.veneersupplies.com/products/Vacuum-Chuck-Gasket-Tape-34-x-116-x-3.html Mon, 30 Jan 2006 11:53:45 +0000 http://www.veneersupplies.com/products/Vacuum-Chuck-Gasket-Tape-34-x-116-x-3.html

            With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum clamping systems such as those from ShopBot, C..

            Price: $3.25

            ]]>

            With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum clamping systems such as those from ShopBot, C..

            Price: $3.25

            ]]> http://www.veneersupplies.com/products/Vacuum-Chucking-Add-On.html Wed, 04 Jan 2006 07:04:27 +0000 http://www.veneersupplies.com/products/Vacuum-Chucking-Add-On.html

            A vacuum chuck for lathe work is a valuable tool. It allows bowls, platters, lids, and many other projects to be completely cleanly and without leaving any tool markings. This 25-piece kit gives you the parts to assemble a vacuum chucking jig for use with the vacuum press systems offered here a..

            Price: $49.10

            ]]>

            A vacuum chuck for lathe work is a valuable tool. It allows bowls, platters, lids, and many other projects to be completely cleanly and without leaving any tool markings. This 25-piece kit gives you the parts to assemble a vacuum chucking jig for use with the vacuum press systems offered here a..

            Price: $49.10

            ]]> http://www.veneersupplies.com/products/Vacuum-Clamping-Add-On.html Sat, 05 Feb 2005 09:29:52 +0000 http://www.veneersupplies.com/products/Vacuum-Clamping-Add-On.html

            This 13-piece kit contains everything you need to add a foot-operated vacuum clamping system to the Project: V2 and Project: EVS vacuum press systems. This kits saves you $20 off the regular website prices (for individual parts) and a whopping $58 of retail prices.

            

            This 13-piece kit contains everything you need to add a foot-operated vacuum clamping system to the Project: V2 and Project: EVS vacuum press systems. This kits saves you $20 off the regular website prices (for individual parts) and a whopping $58 of retail prices.

            http://www.veneersupplies.com/products/Vacuum-Jig-Tube.html

            This brightly colored vacuum tube is ideal for vacuum clamping jigs. It's very flexible and easy to attach and remove.

            Length: 12 feet
            Inside Diameter: 1/4"
            Outside Diameter: 3/8"
            Color: Blue
            Tensile Strength: 2200 psi

            Price: $5.90

            ]]>

            This brightly colored vacuum tube is ideal for vacuum clamping jigs. It's very flexible and easy to attach and remove.

            Length: 12 feet
            Inside Diameter: 1/4"
            Outside Diameter: 3/8"
            Color: Blue
            Tensile Strength: 2200 psi

            Price: $5.90

            ]]> http://www.veneersupplies.com/products/Vacuum-Gasket-Tape-For-Clamping-38-x-18.html Sat, 05 Feb 2005 08:56:12 +0000 http://www.veneersupplies.com/products/Vacuum-Gasket-Tape-For-Clamping-38-x-18.html

            With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum clamping systems such as those from ShopBot, C..

            Price: $11.95

            ]]>

            With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum clamping systems such as those from ShopBot, C..

            Price: $11.95

            ]]> http://www.veneersupplies.com/products/Brass-Barbed-Tee.html Sat, 05 Feb 2005 08:31:13 +0000 http://www.veneersupplies.com/products/Brass-Barbed-Tee.html

            The brass barbed tee splits the vacuum pressure to an additional clamping device. Select the option above for 1/4" or 3/8" ID tubing.

            Price: $1.85

            ]]>

            The brass barbed tee splits the vacuum pressure to an additional clamping device. Select the option above for 1/4" or 3/8" ID tubing.

            Price: $1.85

            ]]> http://www.veneersupplies.com/products/Brass-Barb-Fitting-18-NPT-Male-to-14-Barb.html Sun, 30 Jan 2005 13:17:05 +0000 http://www.veneersupplies.com/products/Brass-Barb-Fitting-18-NPT-Male-to-14-Barb.html

            These fittings are best used on 3/4" vacuum clamping jigs. With 1/8" NPT threads, the hole is small enough to easily attach to the center of clamping jigs. Item is used with 1/4" ID vacuum tube.

            Price: $1.35

            ]]>

            These fittings are best used on 3/4" vacuum clamping jigs. With 1/8" NPT threads, the hole is small enough to easily attach to the center of clamping jigs. Item is used with 1/4" ID vacuum tube.

            Price: $1.35

            ]]> http://www.veneersupplies.com/products/Vacuum-Filter-5-Micron-High-Flow.html Sat, 01 Jan 2005 22:31:23 +0000 http://www.veneersupplies.com/products/Vacuum-Filter-5-Micron-High-Flow.html

            A dedicated fine-particulate filter is the ..

            Price: $19.95 $15.95

            ]]>

            A dedicated fine-particulate filter is the ..

            Price: $19.95 $15.95

            ]]> http://www.veneersupplies.com/products/Brass-Vacuum-Clamp-Fitting-For-Vacuum-Clamping.html Wed, 22 Sep 2004 04:45:27 +0000 http://www.veneersupplies.com/products/Brass-Vacuum-Clamp-Fitting-For-Vacuum-Clamping.html

            If you use your vacuum press for vacuum clamping, this fitting will allow you to directly attach the lock-on vacuum connector to the vacuum clamping jig. The 1/8" NPT version of this fitting is the one that is used in the JoeWoodworker

            If you use your vacuum press for vacuum clamping, this fitting will allow you to directly attach the lock-on vacuum connector to the vacuum clamping jig. The 1/8" NPT version of this fitting is the one that is used in the JoeWoodworker