Product Description

Dura-Max™ is no ordinary vinyl. It is unmistakably the most flexible, durable and puncture resistant vinyl available. Why? Dura-Max vinyl has a higher concentration of plasticizers than any other industrial vinyl. These plasticizers are softening agents which keep the vinyl supple and resilient. A substantial volume of raw VXP stabilizer (the expensive stuff) is added to this vinyl, making it incredibly durable and puncture resistant. Dura-Max vinyl is thick and tough, yet flexible enough to handle most curved and contoured vacuum pressing projects. It is the definitive material for vacuum bag veneering.

Each bag is welded on a state-of-the-art custom RF welding machine operating at 7,000 watts and 50 lb/in of pressure. This exact combination of frequency and clamp strength yields the most durable and airtight seam available. Each bag then undergoes a series of inspections including a final check that I do prior to shipment.

New Flush-Mount Valve Stem
This size vacuum bag now includes our new flush-mount valve stem assembly that allows you to use the full length of the vacuum bag without worry of project surface damage. A specially designed 2.5" diameter 50 mil flange is molded onto the polyurethane valve body and is permanently welded onto each bag. This creates an 80 mil total thickness reinforcement area for maximum durability.

Additional Information

• Actual Size: 54" x 54"
• Approximate Project Size: 48" x 48"
• Thickness: 30 Gauge (30 Mil)
• Color: Clear

Each Bag Includes

• Attached Flush-Mount Valve Stem
• 58" Bag Closure
• Detailed Instruction Sheet

 Please Note

• The opening on this bag is on the 54" side.
• A lock-on connector is required to attach your vacuum system to this bag.
• This bag is sealed on three sides. Some users prefer to have two open ends. To do this, simply trim off the end seal and purchase an additional bag closure.
• The valve stem on this bag is mounted in the center (left to right) and 12" to 15" in from the bag opening.