Product Description

The Dura-Max Elite™ vacuum bagging material has been designed for VeneerSupplies.com using an advanced thermoplastic polyurethane that can withstand pressures exceeding 3,750+ psi and stretch more than 6 times its width and length*. Dura-Max Elite polyurethane film has superior resilience and unmatched puncture resistance. Made in the USA. 

Each bag is welded with a state-of-the-art custom RF welding machine operating at 7,000 watts and 50 lb/in of pressure. This exact combination of frequency and clamp strength yields the most durable and airtight end-seam available. Each bag then undergoes a series of inspections including a final check that I do prior to shipment.

*Elongation and breaking strength based on ASTMD 412 test method.

Features

• New Flush-Mount Valve Stem - The Elite vacuum bag also includes our new flush-mount valve stem assembly that allows you to use the full length of the vacuum bag without worry of project surface damage. A specially designed 2.5" diameter 50 mil flange is molded onto the polyurethane valve body and is permanently welded onto each bag. This creates an 80 mil total thickness reinforcement area for maximum durability.
 
• Vaxcell™ Infusion - Dura-Max Elite vacuum bags are infused with a non-transferring lubricant that works in several ways to make vacuum bagging easy and trouble-free. Vaxcell lubricant prevents all woodworking adhesives from sticking to the bag. If any glue gets on the bag, it simply peels right off. Unlike traditional urethane material, Vaxcell infused polyurethane allows the user to easily slide the platens and project panel into the bag without "blocking" or binding. The slippery surface created by Vaxcell makes inserting project panels a breeze.
 
• Superior Resilience - Months of extensive testing resulted in a custom formulation that is unsurpassed in durability. Dura-Max Elite bagging material withstands 500% more use than standard 30 gauge vinyl yet weighs 33% less.

Additional Information

• Actual Bag Size: 54" x 114"
• Approximate Project Size: 48" x 108"
• Thickness: 20 Gauge (20 Mil)
• Color: Clear
• Construction: Seamless
• Softening Point: 150° F
• Melting Point: 320° F

Each Bag Includes

• Attached Flush-Mount Valve Stem
• 58" Bag Closure
• Detailed Care and Instruction Sheet

Product Notes

• The opening on this bag is on the 54" side.
• A lock-on connector is required to attach your vacuum system to this bag.
• This bag is closed on three sides but some users prefer to have two open ends. To do this, simply trim off the end seal and purchase an additional bag closure.
• The valve stem is mounted in the center (left to right) and approximately 15" in from the bag opening.