In Stock: Yes Quick Ship: Yes

The Dura-Max Elite™ vacuum bagging material has been designed for VeneerSupplies.com using an advanced thermoplastic polyurethane that can withstand pressures exceeding 3,750+ psi and stretch more than 6 times its width and length*. Dura-Max Elite polyurethane film has superior resilience and unmatched puncture resistance. Made in the USA.

Each bag is welded with a state-of-the-art custom RF welding machine operating at 7,000 watts and 50 lb/in of pressure. This exact combination of frequency and clamp strength yields the most durable and airtight seam available. Each bag then undergoes a series of inspections including a final check that I do prior to shipment. These bags also have a 2.5" diameter 40-gauge polyurethane reinforcement disk permanently welded to the bag. This creates a 60-mil total thickness reinforcement area for maximum durability.

Features:

• Vaxcell Infusion - Dura-Max Elite vacuum bags are infused with a non-transferring lubricant that works in several ways to make vacuum bagging easy and trouble-free. Vaxcell lubricant prevents all woodworking adhesives from sticking to the bag. If any glue gets on the bag, it simply peels right off. Unlike traditional urethane material, Vaxcell infused polyurethane allows the user to easily slide the platens and project panel into the bag without "blocking" or binding. The slippery surface created by Vaxcell makes inserting project panels a breeze.
   
• Superior Resilience - Months of extensive testing resulted in a custom formulation that is unsurpassed in durability. Dura-Max Elite bagging material withstands 500% more use than standard 30 gauge vinyl yet weighs 33% less.

Additional Information:

Actual Size: 27" x 54"
Approximate Project Size: 24" x 48"
Thickness: 20 Gauge (20 Mil)
Color: Clear
Softening Point: 150° F
Melting Point: 320° F
Vacuum Connection: Standard valve stem included (designed to fit our lock-on connector)
Bag Closure: Included (click here for more information)

Please Note:

• The opening on this bag is on the 27" side.
• This bag is sealed on three sides. Some users prefer to have two open ends. To do this, simply trim off the end seal and purchase an additional bag closure.
• The valve stem on this bag is mounted in the center (left to right) and 12" to 15" in from the bag opening.

*Elongation and breaking strength based on ASTMD 412 test method.