Shop by Species

DIY Vacuum Press

    Do It Yourself Vacuum Press

VeneerSupplies.com Monthly Newsletter

Vacuum Press Parts

cat-vac-press-parts.jpgBuilding Your Own Vacuum Press?

Each product in this category is from one of our kits. If you're building a vacuum press based on the free plans found on the JoeWoodworker website, be sure to check out the do-it-yourself vacuum press kits which are designed to save you money. Feel free to contact me if you have any questions about building your vacuum press.


  • $12.95 Check Valve - Heavy Duty
    1/4" NPT
    This item is for vacuum press builders looking for a heavy duty brass-body check valve at a reasonable price. Available in two styles: A) Male to Male: For users building the Project: V2 venturi vacuum press using the instructions at...

  • $15.85 Check Valve - Heavy Duty
    3/8" NPT
    This is the check valve from the Project: V2 Premium kit. It features a 3/8" NPT fitting with flow from the female side to the male side. Please note that this check valve is designed for vacuum only.

  • $2.75 Exhaust Muffler
    Add this muffler to your existing vacuum pump to reduce noise without sacrificing efficiency. Highly recommended for all vacuum pump models up to 10 CFM. Reduces noise by 17 to 22 decibels. Thread Type: 1/4" NPT

  • $27.20 Mac Valve
    3-Way, 1/4" NPT
    This 3-way Mac valve controls the air flow from your compressor into the venturi unit. It has the recommended 1/4" pipe threads and meets the CFM requirements for our vacuum press kits. Options Standard Mac Valve Used on Project: EVS and V2...

  • $6.80 Pipe Tap
    1/4" or 1/8" NPT
    So many builders have asked me to add a tap to the catalog of parts needed for the press, that I just couldn't resist. This is the best pipe tap I could find for the money. I figured that since its going into plastic and it only will be used a few...

  • $36.50 PVC Reservoir Kit
    Vacuum Tanks
    These reservoir kits are for the Project: V2™ and Project: EVS™ vacuum presses. I've received several emails from builders on the west coast indicating that solid core schedule 40 pipe was not available in their area. So I'm...

  • $2.50 Sintered Bronze Breather Fitting
    This item is a sintered bronze breather fitting. It is used on the Mac valve and other pnuematic devices to reduce exhaust noise and prevent contaminants from entering the system. Thread Size: 1/4" NPT

  • $0.70 Thread Sealing Teflon Tape
    PTFE Tape
    Thread sealing tape is used on all metal to metal threaded connections to create a perfectly sealed union. Each roll has 260" of 1/2" wide PTFE tape.

  • $42.00 Vac Pro™
    Venturi Vacuum Generator
    The Vac Pro™ venturi device converts air from your compressor into vacuum. These venturi devices create .8 to 9 CFM of vacuum flow and produce 27.5" of Hg of pressure using only 80 PSI of compressed air. Since there are no moving parts, this...

  • $18.90 Vacuum Controller Relay
    30 amp
    This heavy duty DPST relay will do the power switching for vacuum pumps up to 1 HP at 120v AC and 3 HP at 240v AC. This relay is used in conjunction with a vacuum controller for vacuum pumps that draw up to 30 amps. If your vacuum pump draws less...

  • $11.50 Vacuum Damper
    For Large Vacuum Pumps
    It's a good idea to add this vacuum damper to the vacuum controller if your vacuum pump pulls more than 4 CFM. This will prevent the vacuum controller from sputtering on and off at the end of a charge cycle by restricting the air flow to the vacuum...

  • $11.90 Vacuum Gauge - Heavy Duty
    1/4" NPT
    This industrial grade vacuum gauge has heavy-duty sensing elements and a stainless steel case for protection in harsh environments. A gauge like this offers greater accuracy than a general purpose gauge and is typically used in more demanding...

  • $24.90 Vacuum Pressure Controller
    1/8" NPT
    One of the most critical components you will need for the vacuum system is the vacuum pressure controller. The device measures vacuum pressure inside of the reservoir. It turns the vacuum pump on when the pressure inside the tank drops below a given...

  • $329.99 $215.00
    - On Sale -
         Vacuum Pump - Gast 1.1 CFM
    120 VAC
    Condition: New
    This is a 120v Gast continuous duty vacuum pump for building a vacuum veneer press. Gast is one of the leaders of vacuum pump technologies. This particular pump one of their most quiet and reliable units. Features Gast Model:...

  • $529.99 $329.50
    - On Sale -
         Vacuum Pump - Gast 5.5 CFM
    120 VAC
    Condition: New
    This brand new industrial duty vacuum pump by Gast is perfect for large vacuum bags and bending/laminating veneer over odd shaped forms. These are also superb for vacuum clamping bench work and vacuum chucking lathe pieces. I bought a huge...

  • $104.00
    - On Sale -
         Vacuum Pump - Rietschle Thomas 3.15 CFM
    120 VAC
    Condition: Rebuilt
    GD Thomas (formerly Rietschle Thomas) is the leading manufacturer of commercial vacuum pumps. This heavy duty double piston vacuum pump is ideal for vacuum bags and bending/laminating veneer over odd shaped forms. These are also superb for...

  • $6.55 Vacuum Tube - Heavy Duty Braided
    3/8" ID
    This vacuum tubing has a braided reinforcement and is similar to what many of the major vacuum press companies use (though considerably less expensive). This is a heavy duty flexible hose that will last a lifetime. Length: 10' Inside...

  • $0.95 Vacuum Tube (Black Hi-Flex)
    1/4" ID
    This is the tubing used to remotely connect the vacuum controller to the vacuum press system. You can also use clear vinyl tube from the hardware store instead of this item. Each piece is 1' long. This tubing is used on the following vacuum press...

  • $6.95 Vacuum Valve
    1/4" NPT
    Finally! I searched the half the world (ok, maybe a little less) and finally found a affordable valve unit with 1/4" NPT threads that fits snugly on the vacuum press project. This valve is used on the main reservoir that goes to the vacuum line. By...

  • $9.50 Lock-On Vacuum Connector
    I have found only one connector that works perfectly for vacuum pressure. This solid brass vacuum bag connector locks on to the vacuum bag valve stem with a strong spring-loaded clip and features a soft cast O-ring which makes a leak-proof...

  • $23.95 $17.95 Vacuum Filter
    5 Micron, High-Flow
    A dedicated fine-particulate filter is the easiest way to protect your vacuum press equipment from harmful debris. This high-flow filter was designed specifically for vacuum pressure and custom made for the vacuum press systems at JoeWoodworker...

  • $8.95 Vacuum Filter Replacement
    5 Micron, High-Flow
    This is an OEM replacement filter cartridge for our high-flow vacuum filter. These cartridges will not limit air flow. With more than 24 square inches of filter media, the flow of vacuum remains strong up to 10 CFM. These filter cartridges trap...

  • $11.90 Valve Stem Assembly
    Flush Mount
    Our new DuraMax Extreme™ bags have been getting great comments and each review mentions the flush-mount valve stem as a key improvement. The flush-mount valve stem allows you to use the full length of the vacuum bag without...

  • $10.55 Valve Stem Assembly
    This 8-piece valve stem kit is an easy way to connect a vinyl or polyurethane vacuum bag to the lock-on vacuum connector and vacuum hose. Each stem has double-width air channels cut from the center intake to direct airflow quickly and evenly from...

Good News

    Reduced Shipping Rates In Effect


Payments And Promise Shipping Services Payment Security by GeoTrust