Shop by Species

DIY Vacuum Press

    Do It Yourself Vacuum Press

VeneerSupplies.com Monthly Newsletter

Vacuum Clamping

A vacuum press can be used for more than just veneering. A simple add-on and vacuum jig turn the power of your vacuum press into a surprisingly strong clamp for holding projects while you sand, route, and carve. Below, you'll find kits for vacuum clamping and all the parts needed to make your own custom jigs.


  • $6.55 Brass Tube Adapter
    For Vacuum Clamping Jigs
    This ingenious fitting will allow you to use the lock-on vacuum connector to connect to 1/4" ID tube. Expensive? Yes. But these are great for vacuum clamping jigs! Barb Size: 1/4"Connection Size: SchraderAttachment Fitting: Lock-on...

  • $17.50 HDPE For Vacuum Clamping Jigs
    HDPE is perfect for custom vacuum clamping jigs and fixtures because it is non-porous. It holds vacuum pressure perfectly! It's also very strong and yet machinable with almost any woodworking tool. I've sawn, routed, turned, planed, and...

  • $82.50 Vacuum Clamping Add-On
    This 13-piece kit contains everything you need to add a foot-operated vacuum clamping system to the Project: V2 and Project: EVS vacuum press systems. This kits saves you $20 off the regular website prices (for individual parts) and a whopping $58...

  • $89.95 $67.95
    - On Sale -
         Podz™ Vacuum Clamping Jigs
    Podz are simple vacuum jigs designed to affordably clamp projects to your bench top. Using the power of your vacuum press and clamping system, the Podz 26-piece kit allows you to configure the clamping jigs any way you choose to clamp...

  • $7.95 Podz™ Vacuum Jig Gasket Set
    Are your Podz™ gaskets worn? Replace them with these OEM gaskets. Sold in packs of eight. Just like the originals that come with the Podz system each gasket is self-adhesive.

  • $19.25 Vacuum Clamping Jig #1
    This vacuum clamping jig consists of one piece of HDPE measuring 3/4" x 6" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable. Kit Includes 1 Vacuum clamping jig (pre-threaded...

  • $27.25 Vacuum Clamping Jig #2
    This vacuum clamping jig consists of one piece of HDPE measuring 3/4" x 12" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable. Kit Includes 1 Vacuum clamping jig (pre-threaded...

  • $35.50 Vacuum Clamping Jig #3
    This vacuum clamping jig consists of two pieces of HDPE measuring 3/4" x 6" x 12" (approximately). HDPE is the ideal vacuum clamping material because it's flat, smooth, non-porous and machinable. Kit Includes 2 Vacuum clamping jigs (pre-threaded...

  • $52.15 Foot Valve for Vacuum Clamping
    1/4 NPT, 3-Way, 2-Position
    This 3-way/2 position latching foot valve is a rare find at this price. The pedal can be used to control vacuum flow on a clamping jig. The 3-way configuration allows vacuum to be instantly exhausted from the vacuum jig without losing any additional...

  • $23.95 $17.95 Vacuum Filter
    5 Micron, High-Flow
    A dedicated fine-particulate filter is the easiest way to protect your vacuum press equipment from harmful debris. This high-flow filter was designed specifically for vacuum pressure and custom made for the vacuum press systems at JoeWoodworker...

  • $2.30 Mach Ball Valve
    For Vacuum Clamping
    These ball valves are used to create custom vacuum clamping jigs on CNC routers and workbench hold-downs. Each unit consists of a chromium ball bearing, tapered return spring, cir-clip and 13mm outside diameter housing body. The return spring holds...

  • $5.45 Brass Vacuum Clamp Fitting
    For Vacuum Clamping
    If you use your vacuum press for vacuum clamping, this fitting will allow you to directly attach the lock-on vacuum connector to the vacuum clamping jig. The 1/8" NPT version of this fitting is the one that is used in the JoeWoodworker vacuum frame...

  • $11.95 Vacuum Gasket Tape
    For Clamping
    3/8" x 1/8"
    With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum...

  • $11.50 Vacuum Gasket Tape
    For Frame Presses
    3/8" x 1/4"
    With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum...

  • $28.00 $21.80 Vacuum Templating Gasket Tape
    3/8" x 1/16" x 100'
    With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum...

  • $3.25 Vacuum Chuck Gasket Tape
    3/4" x 1/16" x 3'
    With the help of a fellow woodworker, I've found the OEM source for the most incredible vacuum sealing tape available. This is not a knock-off. This is the same high density on-board gasketing tape included with dedicated high-end industrial vacuum...

  • $8.50 Ball Valve Drill Bit
    13mm
    This is a standard 13mm drill bit made by Blu-Mol. High speed steel construction with shank size of 3/8". It is used to drill holes in custom vacuum clamping jigs to hold the matrix style ball valves.I bought these bits a few years ago. They are...

  • $1.35 Brass Barb Fitting
    1/8" NPT Male to 1/4" Barb
    These fittings are best used on 3/4" vacuum clamping jigs. With 1/8" NPT threads, the hole is small enough to easily attach to the center of clamping jigs. Item is used with 1/4" ID vacuum tube.

  • $1.85 Brass Barbed Tee
    The brass barbed tee splits the vacuum pressure to an additional clamping device. Select the option above for 1/4" or 3/8" ID tubing.

  • $7.15 Vacuum Jig Tube
    This brightly colored vacuum tube is ideal for vacuum clamping jigs. It's very flexible and easy to attach and remove. Length: 12 feetInside Diameter: 1/4"Outside Diameter: 3/8"Color: BlueTensile Strength: 2200...

  • $12.40 Ball Bearing for Vacuum Chuck
    This double-sealed ball bearing is the one that is included in the vacuum chucking kit.  Outside diameter: 1 3/8" Inside diameter: 1/2" Width: 7/16" Gasket Seal: Buna-N Optional UpgradeFor a modest fee, I'll complete the task of...

  • $49.10 Vacuum Chucking Add-On
    A vacuum chuck for lathe work is a valuable tool. It allows bowls, platters, lids, and many other projects to be completely cleanly and without leaving any tool markings. This 25-piece kit gives you the parts to assemble a vacuum chucking jig for...

Good News

    Reduced Shipping Rates In Effect


Payments And Promise Shipping Services Payment Security by GeoTrust